Training

FROM EXPERT TO EXPERT

User-oriented training courses have been an integral part of KEB's range of services for a long time. Whether at your site, online or at KEB's central locations: we offer technical, user-oriented training on a variety of topics. With your interests and individual requirements in focus, you benefit from the competent advice of our training team and a knowledge transfer at eye level.

TRAINING OFFERS

DRIVE ELECTRONICS

Our drive controllers combine the functions of traditional frequency inverters with those of dynamic servo controllers. Whether it’s a matter of positioning, speed or torque control, get to know the features of our drive electronics better, or gain a deeper insight into the possibilities offered by our drive controllers. During the drive electronics training course at KEB’s Barntrup or Heilbronn sites, you will be given the precise practical knowledge that you need.

Drive electronics training

CONTROL TECHNOLOGY

Create flexible automation solutions for use in numerous fields of application with KEB’s control technology. Training courses geared to your existing knowledge provide you with practical know-how at KEB’s Barntrup or Heilbronn sites. This allows you to get the most out of KEB’s innovative hardware and software solutions in the area of control technology.

Control technology training

Online Training

No travel to the training location, therefore no travel or accommodation expenses. Online training courses are an attractive alternative to classroom teaching from both a financial and an ecological perspective. In the online training sessions, theoretical content is presented and you are given the opportunity to try out practical exercises on training models. The trainer and trainees can interact with each other and apply everything they have learned in theory directly in practical exercises.

Go to our online seminars

DRIVE ELECTRONICS

On Request

“Basics 3-phase Drives with Drive Controller”

Basics, Course 1A

Barntrup, Germany

Topics:

  • Basics AC drives
  • Basics frequency inverters
  • Basics EMC
  • V/F controlled drives
  • Closed loop controlled drives
  • Error diagnosis

to registration

On Request

“Parametrisation Software COMBIVIS 6 on COMBIVERT F6/S6“

Practical Training, Course 1B

Barntrup, Germany

Topics:

  • Structure of communication
  • Program structure
  • Operation and adjustment of the units
  • Operation assistant
  • Data protection
  • Analysis options with KEB Scope
  • Export functions
  • Practical exercises

to registration

On Request

„Single Axis Drive COMBIVERT F6/S6 Commissioning“

Practical Training Basic, Course 2A

Barntrup, Germany

Topics:

  • Hardware and connection
  • Types of control cards
  • COMBIVIS 6 parameterization tool
  • Functional range
  • Operating modes concerning CiA 402
  • Start-up wizards
  • Error diagnosis
  • Practical exercises

to registration

On Request

”Single Axis Drive COMBIVERT S6/F6”

Practical Training, Course 2B

Barntrup, Germany

Topics:

  • Operating modes concerning CiA 402 (IEC 61800-7-200)
    • Velocity Mode
    • Homing Mode
    • Profile Position Mode
    • Cyclic Synchronous Velocity Mode
    • Cyclic Synchronous Position Mode
  • COMBIVIS 6 start-up wizards
  • Error diagnosis
  • Practical exercises

to registration

On Request

“Safety Module 3 and 5 in COMBIVERT F6/S6”

Practical Training, Course 3

Barntrup, Germany

Topics:

  • Short Instruction concerning ISO 13849 / IEC 62061
  •  Functionality of the devices
  • Safety functions regarding EN 61800-5-2
  • Safety editor in COMBIVIS 6
  • Fault diagnosis
  • Practical exercises

to registration

On Request

“Supply and regenerative units COMBIVERT R6“

Practical Training, Course 5

Barntrup, Germany

Topics:

  • Structure of the devices
  • Design
  • Operation and adjustment
  • Operation
  • Troubleshooting

to registration

On Request

“COMBIVERT G6 and COMBIVIS 6“

Practical Training, Course 9

Barntrup, Germany

Topics:

  • Basics frequency inverters
  • Basics AC drives
  • Connection and taking units into operation
  • Operation surfaces
  • PC-operation surface COMBIVIS 6
  • Function extent of the units
  • Extension of the functional through parameter sets
  • Error diagnosis
  • Accessories
  • Practical exercises

to registration

Your contact
Keb trainings team schroeder muenchenberger tuennermann 01

KEB Automation Training

+49 5263 401-262
schulung-keb@keb.de

CONTROL TECHNOLOGY

On Request

COMBICONTROL C6 BASIC “COMBIVIS studio 6 / COMBICONTROL C6“

Practical training, Course 11

Barntrup, Germany
Topics:
  • Overview COMBICONTROL C6 automation system
    • IPC-based control
    • Embedded control
    • Systembus EtherCAT C6
    • IO-modules
    • Automation platform COMBIVIS studio 6
  • Attachment and device setup
  • Introduction in programming with COMBIVIS studio 6
    • Object orientated project organization (Applicationslayout / terms / objects)
    • Overview: Programing according to standard IEC 61131-3 (ST, FBD, SFC, CFC,LD, IL)
    • Declare / Compile / Login / Download / Debug / Monitor / Trace
    • Bus configuration (EtherCAT), drive Attachment F5, F6, H6, S6
    • Further interfaces on request
  • Exercises and sample projects

to registration

On Request

COMBICONTROL C6 PRO “COMBIVIS studio 6 SOFTMOTION“

Practical Training, Course 12

Barntrup, Germany
Topics:
  • Basics of CONTROL PRO
    (drive configuration, basics, PLC_OPEN, KEB_SMC_UTILITY)
  • Single axis movement (Velocity mode, abs./rel. positioning)
  • Master/Slave-modes (phasing, caming, gearing)
  • Virtual drive, virtual master
  • Externer encoder
  • Exercises and sample projects

to registration

On Request

COMBICONTROL C6 ADVANCED “COMBIVIS studio 6 CNC“

Practical Training, Course 13

Barntrup, Germany
Topics:
  • Basics of CONTROL PRO (Short repetition)
  • Basics of CNC
  • G-Code / Editor / Import
  • Cinematics (Gantry; Portal, Scara, Tripod)
  • Exercises and sample projects

to registration

On Request

COMBICONTROL C6 BASIC “COMBIVIS studio HMI/C6 HMI“

Practical Training, Course 14

Barntrup, Germany
Topics:
  • Basics of the visualization platform COMBIVIS studio HMI
    • Create a standard project
    • Toolbox and basic elements
    • Project transfer to the target device
  • Connections, Tagimport and assignment
    • KEB PLC-driver
    • KEB DIN 66019-driver for inverters
  • Enhanced elements
    • Trends
    • Embeeded screens
    • Alarm handling
    • Datenlogger
    • Visual Basic Scripts
    • Recipe
    • Multilanguage
    • Events
  • Exercises and sample projects

to registration

On Request

COMBICONTROL “COMBIVIS connect”

Practical training, Course 15

Barntrup, Germany
Topics:
  • Basics of COMBIVIS connect
    • Component
    • Scenarios of application / concepts
  • COMBIVIS connect Domain
    • Create a new domain
    • Domain-licencing
    • User-Management
    • Add devices
  • Control Center
    • Remote Desktop
    • VPN
    • Virtual serial connection
    • Filebrowser
    • Remote Taskmanager
    • Statistic
  • Client
    • Settings
    • Netzworktopologies
    • Network-bridges

to registration

On Request

COMBICONTROL “SAFE PLC, SAFE I/O“

Software and practical Training, Course 16

Barntrup, Germany
Topics:
  • Functionality of the devices
  • Handling of safety programming in COMBIVIS
    • PLCopen safety function blocks
    • Communication with a CCOMBIVERT F6/S6 by FSoE
    • Automatically download of safe parameter lists
  • Fault diagnosis
  • Practical exercises

to registration

ONLINE TRAINING

On Request

"BASICS 3-PHASE DRIVES WITH DRIVE CONTROLLER"

Basic Training, Course A

Online, Germany

Topics:

  • Basics AC drives
  • Basics frequency inverters
  • Basics EMC
  • V/F controlled drives
  • Closed loop controlled drives
  • Error diagnosis

to registration

On Request

„COMBIVIS 6 AND COMBIVERT F6/S6“

Basic Training, Course D1

Online, Germany

Topics:

  • Hardware and connection COMBIVERT F6/S6
  • Start-up communication
  • Program structure
  • Operation and adjustment of the units
  • Operation assistant
  • Data protection
  • Analysis options with KEB Scope
  • Export function
  • Practical exercises

to registration

On Request

”SINGLE AXIS DRIVE COMBIVERT F6/S6“

Basic Training, Course D2

Online, Germany

Topics:

  • Hardware COMBIVERT F6 and S6, Options
  • Function of the units
  • Connection and commissioning of the units
  • COMBIVIS 6 start-up wizard
  • State machine according to CiA402 (IEC 61800-7-200)
  • Introduction to the operating modes according to CiA402 (IEC 61800-7-200)
  • Fault diagnosis
  • Practical exercises

to registration

On Request

”SINGLE AXIS DRIVE COMBIVERT F6/S6 - CIA402 MODES OF OPERATION”

DEVICE TRAINING DEEPENING, Course D3

Online, Germany

Topics:

  • Operating modes according to CiA402 (IEC 61800-7-200)
    • Velocity Mode
    • Homing Mode
    • Profile Position Mode
    • Cyclic Synchronous Velocity Mode
    • Cyclic Synchronous Position Mode
  • COMBIVIS 6 start-up wizard
  • Fault diagnosis
  • Practical exercises

to registration

On Request

„SINGLE AXIS DRIVE COMBIVERT F6/S6 - DIGITAL AND ANALOGUE I/O“

Device Training Deeping, Course D4

Online, Germany

Topics:

  • Digital Inputs
    • Function
    • Control of the CiA402 State machine via digital inputs
  • Digital Outputs
    • Function
  • Analogue inputs
    • Parameterisation and adaptation of the analogue inputs to the application.
    • Access of the analogue input variables to parameters of the drive controller
  • Analogue output
    • Parameterisation and adaptation of the analogue inputs to the application
  • Practical exercises

to registration

On Request

”SINGLE AXIS DRIVE COMBIVERT F6/S6 - JOG-FUNCTION, MOTOR POTI, RECIPE MANAGEMENT“

Device Training deeping, Course D5

Online, Germany

Topics:

  • Jog-function
    • Function
  • Cours- Capable applications
    • Parametrization
  • Motor poti 
    • Function
    • Use in conjunction with the jog function
    • Parametrization
  • Receipt management
    • Function and Application
    • Wizard
    • Parametrization

to registration

On Request

”SAFETY MODULES 3 AND 5 – SAFETY MODULES IN COMBIVERT F6/S6"

Device training deepening, Course D7

Online, Germany

Topics:

  • Short instruction concerning ISO 13849 / IEC 62061
  • Functionality of the devices
  • Safety functions regarding EN 61800-5-2
  • Safety editor in COMBIVIS 6
  • Fault diagnosis
  • Practical exercises

to registration